"diary of a distiller" news and stories

Like usual its been a busy week. The fire grate for the copper spirits still was re-worked from square to round. I feel they overcharged me. It cost as much to re-work it as it originally cost new.

We had a few more small things to fix in the brewery. Basically, like I've mentioned before, everything that could be broken, or ruined through neglect, was. Sometimes it's difficult to order parts, they may not have been made for 20 years since the equipment was new. We had to get in touch with France and England to find new valve bodies since the rubber was fried in all the ones for the brew kettle, lauter tun, and fermenting tanks. Hopefully we can get them in the next few days and fix the valves. Otherwise they need to be replaces, at a grand or two for six of them.

We did quite a bit of work on our wine. After making wine all summer it's time to bottle most of it, so we're getting some of it ready to bottle and bottling the rest. The new batch of dry blueberry is very nice. Dry, full bodied, spicy like a shiraz, and just a hint of oak.

Last week was a busy, busy, week. Lots of hard work that brought us much closer to our goals of opening the brewery and distillery. At the end of the week I came down with a mild version of the flu, thanks to the open and sharing nature of my friends and partners. Finally on Saturday morning I ground to a halt at work. I was feeling pretty under the weather, not so bad I couldn't work, but my mental faculties were slowed down.

I decided to do some photography of bottles of the very rare, and out of production, Tanqueray Malacca Gin in my collection; to send to a potential customer who also collects rare spirits. As I was putting things away and moving cases around, I stumbled back in forth in a daze. Then due to my clumsiness a case of empty wine bottles fell from the top of a pallet onto my big toe. Usually I have pretty fast reactions and can catch falling stuff, or at least slow down or break their fall. This time I didn't even notice it until a few seconds after it landed, directly with the pointy corner of the case in the middle of my toe. It didn't hurt at first. Mike was near me hunting for some tools and I pointed out the case balancing on it's corner, sitting on my toe. He just shook his head and shrugged with a rueful smile. I knew it should hurt, but my reflexes were so slowed down that I felt nothing.

I picked up the case and heaved it over my head and back onto the pallet. Grumbling under my breath that this was going to hurt like hell. I started to make my way up the stairs to my office and as I did so my toe started to get warm, then hot, then to burn unmercifully. By the time I hobbled up the stairs and sat down at my desk in the distillery my toe really, really hurt!

Over the weekend Mike and I finished most of the pipe work for the brewery and distillery chilling system. All we now need is the pump and that project is done. I mentioned before, but we are using a 500 gallon wine chilling and clearing tank as the reservoir and cooling system for our chilling system. We had it already available, Mike had picked it up awhile ago very inexpensively, and it was just sitting there taking up room and unused. So being thrifty, we decided to make it useful once again. We ran PVC piping many months ago along the walls of the brewery / distillery; going to all the fermenters, the copper spirits still, and locations of future stills. Then we connected the brewery chilling plate and transfer system for the hot wort to the network. Finally we ran the pipe along the ceiling of the basement to the cooling tank, and prepped everything for installing the pump.

You can see some photos of this in the galleries to come. Also I show a few of our 500 gallon wine fermenting and storage tanks. The reason I'm show them is to focus on the PVC piping along the ceiling above the tanks. This is for venting CO2 from the tanks, to the outside. Each tank that has active fermentation still in progress has tubing that comes out of an airlock and goes into the CO2 vent pipe. This way the basement winery doesn't become filled with CO2, killing us. That just wouldn't be fun.

Early Monday morning the boiler guys came to start the boiler installation. We are usually closed Sundays and Mondays, but Mike went in to work with them; while I was off down to Rockport, near where I used to live in Rockland / Owls Head, to meet with a Steel Work company to discuss my latest project. The boiler guys spent several days working on the installation, and will come back next week to finish it.

Last Friday we took the day off from installing the steam pipes for our new brewery boiler, to bottle our first hard cider. This is the first new product to be released since I joined the team, and I had a lot of input towards its design. I have had some experience in the past creating hard ciders, both as a home brewer and wine maker, as well as commercially. Right after Mike and I shook hands to form our partnership late last November, I set off to Cornell University's Agricultural Experimental Station in Geneva, NY to take a week of workshops, primarily on advanced hard cider development and production techniques. The new information I picked up helped fine tune this cider into a great product over the past year.

We started with several different batches of sweet apple cider, fresh pressed from locally grown apples. Each batch had a different blend of apples and was fermented at cool temperatures using different yeasts. After the primary fermentation, the cider was taken off the lees (old, spent, dead and dormant yeast that settles to the bottom of the fermenting tank.) Then put into new tanks to age slowly for months and months, all at cool temperatures in our wine cellar. The cool temperature and slow, slow, slow, fermentation ensure that there will be lots of fresh apple flavor in the finished cider; as well as the tones and notes from the fermentation. Since each batch was made from different apples, and different yeasts; they had a completely different character from each other.

One of the craft secrets to creating a great hard cider is long and slow aging; and this we had done. The other is blending the cider. If you just make one, huge, batch of hard cider using all your apples, it tends to taste flat and one dimensional after fermentation. But if you make several smaller batches, with different apples in each, and later blend them carefully together; you get a final cider that is greater than the sum of its parts. Really great ciders save back some of the final blend to age even longer, and this is added to the blend the following year/s to bring in even greater complexity.

Hi Folks, well the last of the work in building the brewery, then distillery, is well under way. I mentioned that we are finally installing the steam boiler for the brewery. It's a difficult and heavy job. First we took apart all the old steam pipes attached to the brew kettle, and scavenged all the pieces that we could use. Then we cleaned them up to remove mild rust and treated them to prevent further corrosion. Many are already cut to the perfect lengths and threaded at the ends. So it will save us a lot of time and work to re-use them.

We here at Winterport Winery / Penobscot Bay Distillery & Brewery live by the New England and Maine way of thrift. As Francis H. Sisson said almost a hundred years ago, "Thrift was never more necessary in the world's history than it is today." But there are many sides to thrift. As Orison Swett Marden said, "Thrift means that you should always have the best you can possibly afford, when the thing has any reference to your physical and mental health, to your growth in efficiency and power." This holds true in business, as in personal matters. So, while we use and re-use what we can, we also make sure to use the best quality available as well. So in matters of construction, if it is good, solid, and recyclable, it's back in the game. If not, then chuck it out; and replace with the best available.

Just as a side note: the type of pipe we are working with is called "Black Pipe", the type of steel pipe used for natural gas, hot water and steam circulation in boilers, and it is made of heavy steel. It's thick, strong, but not as hard as stainless steel; and so more malleable. It expands and contracts better and is able to handle shifting; that would crack the harder, but more brittle stainless steel. You need heavy equipment to cut and tread the pipe ends. So we rented a pipe cutter/threader to do the job. This pipe is connected with even more malleable cast iron fittings. All of which are very solid and long lasting, but weigh a TON.